c
2019 Sun Hydraulics 1 of 4
MODEL
DBP
ISO 05: On P
CAVITY: T-5A
Check, On P
Flow Control, Meter-in P
Needle, Meter-in P
TECHNICAL DATA
Body Type Sandwich
Interface ISO 05
Body Features On P
Stack Height 62 mm
Seal Plate Included (see notes) No
Open Cavities 1
Cavity T-5A
Model Weight 0.66 kg.
sunhydraulics.com/model/
DBP
NOTES
For check valve application, use only with CX*A check valves - free flow nose to side.
Seal retainer plate is not required for this model.
Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
c
2019 Sun Hydraulics 2 of 4
1 2 3 4
5 6 7 8
9 10 11 12
INCLUDED COMPONENTS
Part Description Quantity
500-001-014 O-Ring 5
MODIFIER
6061-T651 Aluminum, Buna-N
/11 6061-T651 Aluminum, Buna-N, Clear Anodize - Per MIL
SPEC 8625F Type II, Class I
/10 6061-T651 Aluminum, Buna-N, Black Anodize - Per MIL
SPEC 8625F Type II, Class II
/V 6061-T651 Aluminum, Viton
/16 6061-T651 Aluminum, Viton, Clear Anodize - Per MIL
SPEC 8625F Type II, Class I
/15 6061-T651 Aluminum, Viton, Black Anodize - Per MIL
SPEC 8625F Type II, Class II
/S 65-45-12 Ductile Iron, Buna-N, Chem. Black
/S3 65-45-12 Ductile Iron, Buna-N, Trivalent Clear Zinc with
Top Sealer
/Y 65-45-12 Ductile Iron, Viton, Chem. Black
/Y3 65-45-12 Ductile Iron, Viton, Trivalent Clear Zinc with
Top Sealer
MANIFOLD FACES
FACE GRID
Face 2
Model Code Example: DBP
CONFIGURATION OPTIONS
c
2019 Sun Hydraulics 3 of 4
Face 5
Face 6
c
2019 Sun Hydraulics 4 of 4
Face 7
